Changing the SD+ port

Login

Type the device IP at the web browser search bar;

The default IP is: 192.168.10.87 or 192.168.1.87

NOTE: If trying to connect with the default IP, make sure that your machine is at the same network range of the SD+.

Login with the default user, or any other user of your choice.

User: default  

Password: Default123  

Go to the "Application" page

NOTE: Some system interfaces may be quite different depending on how old is the system version of your device. However, the core workflow maintain the same

On the Application page, Clone the configuration file (.back) from the current SD+ execution area (left side), to the application configuration area, simply click the "Clone" button.

Once cloned, simply edit the configuration area.

Choosing the input

Make sure you are in the Connections > Input tab

Note: If you want to change the output, simply change it from "input" to "output"

Then select the Connection you want to change and click "edit"

Choose the type of entry you want

Note: If you wish, you can also change the other information on the right of this same page (The same applies if you are updating the output).

Don't forget to Confirm the changes by clicking the green button.

Close Editing and apply chances

"Apply" consists of executing the modifications made in the configuration area. The IED will restart and the changes will be applied.

Once is all done, your IED will reset and apply the configuration.

Any trouble or doubts send us an e-mail or create a ticket at our support platform:

sam@treetech.com.br

sam.treetech.com.br/en/support/tickets/new